DETAILS
The Saturn™ 4 Environmental Controller by Titan Controls is a basic environmental controller that enables the user to control desired temperature and humidity settings, operate a carbon dioxide (CO2) controller, an exhaust fan, and a dehumidifier. The Saturn™ 4 can also operate a device that operates only when it's dark
The Saturn™ 4 Environmental Controller features digitally precise and easy to use knobs that dial in the desired temperature and humidity settings. So simple, a single button allows you to change between three different operating modes. Comes with a 15-foot long remote sensor and a photocell for nighttime control. High-impact plastic enclosure protects internal components from dust, rust and moisture.
The Saturn™ 4 has three independent operating modes. The selection depends on the type of devices being connected to the controller. Press the Select Mode button to change from MODE A, B or C. A green LED will let you know what MODE you are operating in.
Mode A: This mode independently lowers your temperature and humidity. If you are connecting a cooling device (such as a exhaust fan) to lower the temperature AND a dehumidifier to lower the humidity level, the controller will activate these devices independently based on the temperature and humidity levels in your grow room and your preferred set points. The ‘Cooling Output’ is activated when the temperature set point is exceeded and the ‘Humid/Dehumid Output’ is activated when the humidity set point is exceeded.
Mode B: This mode simultaneously lowers your temperature and humidity. If you are connecting a cooling device (such as an exhaust fan) to lower your temperature AND a dehumidifier to lower the humidity levels, the controller will activate the devices simultaneously if the temperature rises above the set point AND/OR the humidity level rises above the set point. The ‘Cooling Output’ and ‘Humid/Dehumid Output” will both be activated until both the temperature and/or humidity set point is reached.
Mode C: This mode independently lowers the temperature and increases the humidity. If you’re connecting a cooling device (such as a fan) to lower your temperature AND a humidifier to raise the humidity level, the controller will activate these devices independently based on the temperature and humidity levels in your grow room and your preferred set points. The ‘Cooling Output’ is activated when the temperature set point is exceeded, and the ‘Humid/Dehumid Output’ is activated when the humidity set point is exceeded.
The Saturn™ 4 Environmental Controller measures 9 inches tall by 7 inches wide by 3 and 3/4 inches deep. Humidity control range between 5% and 95% non-condensing relative humidity (RH) with an accuracy of +/- 3% RH of desired setting. Temperature control settings range between 41 degrees F. and 113 degrees with an accuracy of +/- 1 degree F. Input/Output voltage is 120 Volts; Maximum amperage 14.5 Amps; Operating Hertz: 60 Hz.; 3-year manufacturers warranty.
ADDITIONAL INFORMATION
| SKU | CTS4 |
| Manufacturer | No |